PRX712                            12" Two-Way Full-Range Main System/Floor Monitor            PRX712 is a compact and versatile speaker in the PRX700 Series. It has been designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA.

Features :   Specifications :

135 dB peak SPL 12" Differential Drive® low-frequency driver for low-distortion and higher SPL 1.5" diameter next generation JBL neodymium compression driver JBL designed waveguide for accurate coverage Efficient Class-D amplifier technology Optimized EQ for monitor or front-of-house applications DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ Line level and direct microphone input capability Professional XLR-1/4" combination inputs, RCA inputs, and XLR loop-through Multi-angle enclosure for main PA or floor monitor applications Integrated 36 mm pole mount socket with angle down tilt Injection molded handle with backing cup for easy transport Integrated M10 suspension points for easy setup Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™finish. Cloth backed, dent-resistant 16 gauge steel grilles   Power Rating   :   1500 W Frequency Range (-10 dB)   :   Main: 44.8 Hz – 19.6 kHz Monitor: 44.8 Hz – 19.5 kHz Frequency Response (±3 dB)   :   Main: 55.7 Hz – 18.2 kHz Monitor: 56.5 Hz – 17.7 kHz Coverage Pattern   :   90° x 50° nominal Directivity Index (DI)   :   10.2 dB Directivity Factor (Q)   :   10.4 Crossover Frequency   :   1.8 kHz Maximum SPL   :   Normal: 135 dB Boost: 135 dB Signal Indicators   :   Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting Signal: Green LED indicates signal present Power/Standby : Blue indicates system has power and ready to pass audio, Red indicates system has power but is in a power saving mode and will not pass audio. Dynamic Control (Input)   :   dbx Type IV™ limiter circuit Input Impedance   :   20K Ohms (balanced), 10K Ohms (unbalanced) LF Driver   :   1 x JBL 272G 305mm (12 in) woofer HF Driver   :   1 x JBL 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver Enclosure   :   Asymmetrical, 18 mm, plywood Suspension / Mounting   :   Dual 36 mm pole socket, 12 x M10 Suspension Points Transport   :   1 x injection molded handles with backing cup Finish   :   Obsidian DuraFlex™ finish Grille   :   Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing. Input Connectors   :   2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input Output Connectors   :   1 male XLR balanced output Dimensions (H x W x D)   :   612.394 mm x 384.556 mm x 341.376 mm (24.11 in x 15.14 in x 13.44 in) Net Weight   :   19.4 kg (42.5 lb.) Applications : PRX712 is a compact and versatile speaker in the PRX700 Series. It has been designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a dual socket pole mount the PRX712 is a perfect match with a PRX718XLF subwoofer, offering a high performance self-powered sub/sat system. The PRX712 is comprised of a 12" Differential Drive® woofer, a 2408H-1, 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by 1500 watt Class-D digital power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization. All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each. The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.