PRX612M                        12 in. Two-Way Multipurpose Self-Powered Sound Reinforcement System              PRX612M is the most compact and versatile speaker in the PRX600 Series. It has been designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA.

Features :   Specifications :

Maximum SPL 134db peak Dual purpose enclosure for both front-of house and floor monitor applications Eight M10 fly points for horizontal or vertical suspension. One M10 pull-back point Optimized EQ for monitor or front-of-house applications 305mm (12 in) Differential Drive® dual voice-coil and magnetic gap, neodymium woofer 37.5mm (1.5 in) annular polymer diaphragm, neodymium, compression driver 1000 Watt (Dual 500 watt) Class-D, Crown® amplifier DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ Professional XLR line and ¼" Mic/Instrument inputs, with loop through Dual-angle pole mount socket   System Type   :   Self-powered 12", two-way, bass-reflex Maximum SPL Output   :   Full Range: 134 dB peak Monitor: 133 dB peak Frequency Range (-10 dB)   :   Full Range: 50 Hz – 19.5 kHz Monitor: 51 Hz – 19.5 kHz Frequency Response (±3 dB)   :   Full Range: 60 Hz – 17.5 kHz Monitor: 61 Hz – 18.5 kHz Coverage Pattern   :   90º x 50º nominal Amp Design   :   Crown® Class D Power Rating   :   1000 W ( 2 x 500 ) Dimension (H x W x D):   :   592 mm x 353 mm x 340 mm ( 23.3 in x 13.9 in x 13.4 in ) Net Weight   :   15.6 kg ( 34.5 lb ) Applications : PRX612M is the most compact and versatile speaker in the PRX600 Series. It has been designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a dual socket pole mount the PRX612M is a perfect match with a PRX618S subwoofer, offering a high performance self-powered sub/sat system. The PRX612M is comprised of a 305 mm (12in) 262F-1 Differential Drive® woofer, a 2408H-1, 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by 1000 watt (dual 500 watt) Crown® Class-D digital power amplifier. A propriety DSP chip is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization. All PRX600 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX600 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each. The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level, via the level control knob.